Shrinkwrap works very well for protecting machinery against weather damage while being stored or transported. It is inexpensive, easily applied, and UV protected for long term usage (12 months+). General application steps are listed below. Please note that the shrinkwrap you will be using is not flame retardant unless specified on the label, so a fire extinguisher must be kept handy at all times, and all safety precautions must be followed.
A complete shrinkwrapping system used for covering almost all objects. In addition to boats, marine applications, our premium shrinkwrap is used in many manufacturing applications for covering large products against damage during transportation and storage. Our shrinkwrap comes in widths of 12′ – 40′ and can cover entire flatbed loads of machinery and 60′+ long boats with one piece.
-Shrinkwrap protects against weather damage.
-It’s waterproof!! It can fully encapsulate just about anything.
-One piece coverage. Cover entire flatbed loads and boats 60′+ boats with one piece!
-100% virgin resin shrinkwrap with maximum UV inhibitors costs only pennies per square foot.
-You can’t afford NOT to shrinkwrap.
-Common sense approach to application.
-Logical installation steps. Training video offers step by step instructions on the shrinkwrap process.
NO SURFACE DAMAGE
-When properly applied, shrinkwrap will not move or chafe during transportation or storage unlike bulky, dirty tarps.
-Our shrinkwrap covers can be ventilated to eliminate moisture and mildew problems.
-We offer several countermeasures that inhibit moisture and mildew from forming on shrinkwrapped units.
-We offer Vapor Corrosion Inhibiting products to prevent damage to sensitive metals and electrical circuits.
-Widest selection of zipper access doors and solutions available.
-Gain entry to your covered unit without cutting or removing your shrinkwrap cover.
-Custom zipper access door solutions available to fit any job!
Flame Retardant Shrinkwrap—contains specialized additives that will extinguish the wrap within 4 seconds of having the source of ignition removed from the material. This makes it an ideal shrinkwrap for scaffolding, shipyards, factories, containments, etc. where people will be working under the material. All of our Flame Retardant Shrinkwrap meets, or exceeds, NFPA 701 Specification. Flame Retardant Shrinkwrap comes in 7, 9 and 12-ml thicknesses.
VCI Shrinkwrap—is a “Volatile Corrosion Inhibiting” shrinkwrap. It contains additives that will prevent corrosion on both ferrous and non-ferrous metals, and electrical connections, for periods up to 2 years. VCI Shrinkwrap comes in both 6 and 7-ml thicknesses.
BioShrink® Tan Shrinkwrap—is our newest specialty shrinkwrap. It contains Anti-microbial additives that will minimize mold and mildew buildup on whatever it is covering. The additives will remain active as long as the shrinkwrap is intact. It comes in an 8-ml thickness.
All of our premium shrinkwrap is made of 100% virgin resin materials with maximum UV inhibitors for long term outside usage. We offer several mil thicknesses for different types of applications. All of our shrinkwrap is recyclable using the REBAG® Recycling Bags. It is a #4 Low Density Polyethylene.